Features
Universal AC Input 90~305VAC.
Class 2 Power Supply Unit.
Constant Voltage PWM Style Output.
Built in 2 Stage PFC Function.
Protections: OVP / OCP / SCP / OTP.
Fully Insulated Case with IP67 Level.
Cooling by Free Air Convection.
Optional Dimming Type : GP-LP060-xxVA.
V : for Constant Voltage / A : for 3-in-1 Dimming Type.
Safety Approval 
Specifications
| Model No. | GP‐LP060P‐12VA | GP‐LP060P‐24VA | |
|
Output |
DC Voltage Range | 12V | 24V |
| Rated Current | 0‐ 5A | 0‐ 2.5A | |
| Max. Power | 60W | 60W | |
| Ripple &Noise (Max.) Note.2 | 1Vp‐p at 100% duty output | ||
| PWM Dimming Frequency | >1700Hz | ||
| Voltage Tolerance Note.3 | ± 1V | ||
| DC Dimming | DC 0‐10V or Electronic Potentiometer 0‐10V | ||
| PWM Dimming | Puls:Hi=10V Low=0V, Duty:0%~100%, Fsw 0.5‐3KHZ | ||
| Resistance Dimming | 0KΩ~100KΩ | ||
| Efficiency at 230VAC | 85% with full load. | ||
| Set up time (Max.) | 0.5 sec. / 230VAC with full load. | ||
|
Input |
Voltage Range | 90 ~ 305VAC | |
| Frequency Range | 47 Hz ~ 63 Hz | ||
| AC Current (Max.) | 1A at 115VAC / 0.5A at 230VAC | ||
|
Power Factor |
PF >0.98 at 115Vac / PF >0.94 at 230Vac / PF >0.9, THD <20% at 277VAC with full load. | ||
| Inrush Current (Max.) | 60A at 230VAC | ||
| No Load Consumption | < 0.5W at 230VAC | ||
| Leakage Current | < 0.5mA / 240VAC | ||
|
Protections |
Over Current |
110% ~ 150% rated current.
Type: Shut down and auto recovers after fault condition disappeared. |
|
|
Short Circuit |
Type: Shut down and auto recovers after fault condition
disappeared. |
||
|
Over Voltage |
110%‐150% rated output voltage | |
| Type: Latch OFF Mode. (Re‐power on to recover). | ||
|
Over Temperature |
Type: Latch OFF Mode. (Re‐power on to recover) TC: 95°C ± 10°C | |
|
Environment |
Operation Temp | ‐20°C ~50°C ambient operating at full load (Refer to
output load derating curve) |
| Operation Humidity | 20% ~ 90% RH non‐condensing. | |
| Storage Temp | ‐40°C ~ +80°C | |
| Storage Humidity | 10% ~ 90% RH | |
| Vibration | 10~500 Hz, 2G 10 min./1 cycle, period for 60 min. each along X, Y, Z axes. | |
|
Safety & EMC |
Safety Standards | EN61347‐1, EN61347‐2‐13 , IP67/UL8750/UL60950
Approved. |
| Withstand Voltage | I/P ‐ O/P: 3.75K VAC | |
| Isolation Resistance | I/P‐O/P:100M ohms / 500VDC at 25°C | |
| EMI Conduction & Radiation | EN55015 | |
| Harmonic Current | EN61000‐3‐2 Class C,EN61000‐3‐3 | |
| EMS Immunity | EN61000‐4‐2,3,4,5,6,8,11 Light industry level, criteria A | |
| Others | MTBF | 200k hours min. MIL‐HDBK‐217F(25°C) |
| Dimension(L x W x H) | 163 x 44.2 x 32.5 mm; 371g/pcs | |
|
Note |
1. All specifications not specially mentioned are measured at 230VAC and 25°C ambient temperature.
2. Ripple & Noise are measured at Full load ,20MHz bandwidth with 0.1uf ceramic capacitors in parallel. 3. Voltage Tolerance: includes line regulation, load regulation and set‐up tolerance. |
|
